ELASTOSIL® VARIO 15
Product number:
A60082256-2
Product information "ELASTOSIL® VARIO 15"
Properties Uncured
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | Translucent | - |
| Density 23°C | - | 1.06 g/cm³ | DIN EN ISO 2811-1 |
| Viscosity, dynamic 23°C, stirred | - | 5.000 mPa·s | ISO 3219 |
Catalyzed
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Viscosity, dynamic 23°C | - | 3.000 mPa·s | ISO 3219 |
| Mix ratio with ELASTOSIL® Catalyst Vario or Catalyst Vario F | - | 10 : 1 pbw | - |
| Pot Life 23°C, Catalyst Vario F, up to 100000 mPas | - | 2 min | DIN EN ISO 2555 |
| Pot Life 23°C, Catalyst Vario up to 100000 mPas | - | 150 min | DIN EN ISO 2555 |
| Demoldable 23° C with ELASTOSIL® Catalyst VARIO F | - | 15 min | - |
| Demoldable 23°C with ELASTOSIL® Catalyst VARIO | - | 6 h | - |
Properties Cured
Curing conditions: 24 h / 23 °C
Curing conditions: 24 h / 23 °C
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Density 23°C in water | - | 1.06 g/cm³ | DIN EN ISO 1183-1 A |
| Tear strength | - | 15 | ASTM D 624 B |
| Hardness Shore A | - | 15 | DIN ISO 48-4 |
| Tensile strength | - | 6.5 N/mm² | ISO 37 type 1 |
| Elongation at break | - | 900 % | ISO 37 type 1 |
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® VARIO 15"
| Colour: | Translucent |
|---|---|
| Elongation at break: | 900 % |
| Max. temp. °C: | 180°C |
| Properties: | Adjustable hardness, Food contact, High mechanical strength, Resistant to casting resins |
| Shore A: | 15 |
| Silicone product groups: | Mould-making compounds |
| Silicone system: | RTV-2 addition-curing |
| Viscosity [mPa·s] D=0.5–1 1/s: | 1'000 - 10'000 |