ELASTOSIL® C 1200
Product number:
60087268.1
Product information "ELASTOSIL® C 1200"
Properties Uncured
These figures are only intended as a guide and should not be used in preparing specifications.
|
Property
|
Condition
|
A
|
B
|
Method
|
|---|---|---|---|---|
| Color | - | transparent | blue | - |
| Density | 23 °C | 1.05 g/cm³ | 1.05 g/cm³ | DIN EN ISO 2811-1 |
| Viscosity, dynamic | 23 °C | 20000 mPa·s | 20000 mPa·s | ISO 3219 |
Catalyzed
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | blue / translucent | - |
| Mix ratio | - | 1 : 1 | A : B |
| Pot life | - | 20 min | - |
| Demoldable after | - | 60 min | - |
Properties Cured
Vulcanizate after 24 h at 23 °C
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | blue/translucent | - |
| Tear strength | - | 25 N/mm | ASTM D 624 B |
| Hardness Shore A | - | 25 | DIN ISO 48-4 |
| Tensile strength | - | 5 N/mm² | ISO 37 type 1 |
| Elongation at break | - | 500 % | ISO 37 type 1 |
These figures are only intended as a guide and should not be used in preparing specifications.
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® C 1200"
| Colour: | Blue |
|---|---|
| Elongation at break: | 500% |
| Properties: | Vacuum cover |
| Shore A: | 25 |
| Silicone product groups: | Mould-making compounds |
| Silicone system: | RTV-2 addition-curing |
| Tensile strength: | 5 N/mm² |
| Viscosity [mPa·s] D=0.5–1 1/s: | 10'000 - 20'000 |