ELASTOSIL® RT 745 A/B
Product number:
60080709
Product information "ELASTOSIL® RT 745 A/B"
Properties Uncured
|
Property
|
Condition
|
A
|
B
|
Method
|
|---|---|---|---|---|
| Color | - | brownish | translucent | - |
| Density | 23 °C | 0.97 g/cm³ | 0.97 g/cm³ | DIN EN ISO 2811-1 |
| Viscosity, dynamic | 23 °C | 1000 mPa·s | 1000 mPa·s | ISO 3219 |
Properties Catalyzed A+B
1 (pbw)2 at 23 °C, up to 100000 mPa s
These figures are only intended as a guide and should not be used in preparing specifications.
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Viscosity, dynamic of mix | 23 °C | 1000 mPa·s | ISO 3219 |
| Platinum catalyst in component | - | A | - |
| Mix ratio[1] | - | 1 : 1 | A : B |
| Pot life[2] | - | ≥ 4 h | Brookfield |
These figures are only intended as a guide and should not be used in preparing specifications.
Properties Cured
Cured for 30 min at 150 °C in a circulating air oven
These figures are only intended as a guide and should not be used in preparing specifications.
Cured for 30 min at 150 °C in a circulating air oven
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | translucent, brownish | - |
| Density in water | 23 °C | 0.97 g/cm³ | DIN EN ISO 1183-1 A |
| Hardness Shore A | - | 15 | DIN ISO 48-4 |
| Modulus at 100 % elongation | 100 % | 0.2 N/mm² | ISO 37 |
| Volume resistivity | - | 10¹⁶ Ohmcm | - |
DisclaimerAll
the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® RT 745 A/B"
| Dielectric constant: | 2.9 / 50 Hz [εr] |
|---|---|
| Max. temp. °C: | 160°C |
| Properties: | Heat-curing, Self-adhesive |
| Shore A: | 15 |
| Silicone product groups: | Potting compounds |
| Silicone system: | RTV-2 addition-curing |
| Thermal conductivity: | 0,2 [W/mK] |
| Viscosity [mPa·s] D=0.5–1 1/s: | 1'000 - 10'000 |
| Volume resistivity: | 10¹⁵ Ohmcm |
Accessories
FB25 Hand flame set
CHF 367.25*
Das PYROSIL® Flammenbeschichtungsgerät:
P/N 89012 FB25 - Hand flaming set
- Flame coating device
- Effective and cost-effective
- Can be used for almost all materials
- Gentle on materials in terms of temperature
Primer G790 TF
CHF 45.30*
GRUNDIERUNG G790 TOLUOL FREI:
P/N 60096791 Bottle 0.7kg
- Adhesion promoter, for addition-curing silicone
- Coating techniques such as dipping, brushing or spraying
- Free from toluene and other aromatic solvents