ELASTOSIL® RT 602 A/B
Product information "ELASTOSIL® RT 602 A/B"
Properties Uncured
|
Property
|
Condition
|
A
|
B
|
Method
|
|---|---|---|---|---|
| Color | - | light gray | transparent | - |
| Density | - | 1.17 g/cm³ | 0.97 g/cm³ | DIN EN ISO 2811-1 |
| Viscosity, dynamic | 23 °C | 5000 mPa·s | 200 mPa·s | ISO 3219 |
Catalyzed
1 (pbw)
2 at 23 °C, up to 100000 mPa s
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Viscosity, dynamic of mix | - | 3500 mPa·s | ISO 3219 |
| Platinum catalyst in component | - | A | - |
| Mix ratio[1] | - | 9 : 1 | A : B |
| Pot life[2] | - | 80 min | - |
2 at 23 °C, up to 100000 mPa s
Properties Cured
Cured for 30 min at 150 °C in a circulating air oven.
Cured for 30 min at 150 °C in a circulating air oven.
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | light gray | - |
| Density | 23 °C | 1.17 g/cm³ | DIN EN ISO 1183-1 A |
| Hardness Shore A | - | 30 | DIN ISO 48-4 |
| Tensile strength | - | 1.5 N/mm² | ISO 37 type 1 |
| Elongation at break | - | 130 % | ISO 37 type 1 |
| Volume resistivity | - | 10¹⁵ Ohmcm | IEC 62631-3-1 |
| Permittivity | - | 2.7 | IEC 62631-2-1 |
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® RT 602 A/B"
| Colour: | Light grey |
|---|---|
| Dielectric constant: | 2.7 / 50 Hz [εr] |
| Max. temp. °C: | 200°C |
| Shore A: | 30 |
| Silicone product groups: | Potting compounds |
| Silicone system: | RTV-2 addition-curing |
| Thermal conductivity: | 0,2 [W/mK] |
| Viscosity [mPa·s] D=0.5–1 1/s: | 1'000 - 10'000 |
| Volume resistivity: | 10¹⁵ Ohmcm |
Zubehör
FB25 Hand flame set
CHF 367.25*
Das PYROSIL® Flammenbeschichtungsgerät:
P/N 89012 FB25 - Hand flaming set
- Flame coating device
- Effective and cost-effective
- Can be used for almost all materials
- Gentle on materials in terms of temperature
Primer G790 TF
CHF 45.30*
GRUNDIERUNG G790 TOLUOL FREI:
P/N 60096791 Bottle 0.7kg
- Adhesion promoter, for addition-curing silicone
- Coating techniques such as dipping, brushing or spraying
- Free from toluene and other aromatic solvents