ELASTOSIL® RT 601 A/B

WACKER

CHF 103.90*

Prices excl. VAT plus shipping costs

Available immediately

ELASTOSIL® RT 601 A/B

P/N 60080682 A/B Set- 1kg

P/N 60080673 A/B Pail -5kg

Product number: 60080682

Data sheets

Available downloads Technical Data Sheet / Safety Data Sheet

Product information "ELASTOSIL® RT 601 A/B"

ELASTOSIL® RT 601 A/B is a crystal-clear, addition-curing two-part silicone potting compound with a 9:1 mix ratio. It protects PCBs, sensors and components against moisture and dirt and allows visual inspection through the potting. Pot life approx. 90 min, cure can be accelerated with heat, hardness approx. 45 Shore A.

Properties Uncured

Property	Condition	A	B	Method
Color	-	colorless	colorless	-
Density	23 °C	1.03 g/cm³	0.97 g/cm³	DIN EN ISO 2811-1
Viscosity, dynamic	23 °C	5000 mPa·s	40 mPa·s	ISO 3219

These figures are only intended as a guide and should not be used in preparing specifications.

Properties Catalyzed A+B

Property	Condition	Value	Method
Viscosity, dynamic of mix	23 °C	3500 mPa·s	ISO 3219
Platinum catalyst in component	-	A	-
Mix ratio^[1]	-	9 : 1	A : B
Pot life^[2]	-	90 min	-

¹ (pbw)
² at 23 °C, up to 20000 mPa s

These figures are only intended as a guide and should not be used in preparing specifications.

Properties Cured
Cured for 30 min at 150 °C in a circulating air oven.

Property	Condition	Value	Method
Color	-	colorless, transparent	-
Density	23 °C	1.02 g/cm³	DIN EN ISO 1183-1 A
Hardness Shore A	-	45	DIN ISO 48-4
Tensile strength	-	6 N/mm²	ISO 37 type 1
Elongation at break	-	100 %	ISO 37 type 1
Volume resistivity	-	10¹⁵ Ohmcm	IEC 62631-3-1
Permittivity	-	2.8	IEC 62631-2-1

These figures are only intended as a guide and should not be used in preparing specifications.

Disclaimer

All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.

Properties "ELASTOSIL® RT 601 A/B"

Colour:	Crystal clear
Dielectric constant:	2.8 / 50 Hz [εr]
Max. temp. °C:	150°C
Shore A:	45
Silicone product groups:	Potting compounds
Silicone system:	RTV-2 addition-curing
Thermal conductivity:	0,2 [W/mK]
Viscosity [mPa·s] D=0.5–1 1/s:	1'000 - 10'000
Volume resistivity:	10¹⁵ Ohmcm