ELASTOSIL® E10
Product information "ELASTOSIL® E10"
Properties Uncured
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | red | - |
| Density | 23 °C | 1.10 g/cm³ | DIN EN ISO 1183-1 A |
| Viscosity D = 0,5 1/s | 25 °C | 9000 | ISO 3219 |
| Viscosity D = 25 1/s | 25 °C | 6500 | ISO 3219 |
| Skin formation time[1] | - | 10 - 15 min | - |
| Curing time | 23 °C | 50 % r.h | 12 h/mm | - |
1 at 23 °C, 50 % RH
These figures are only intended as a guide and should not be used in preparing specifications.
These figures are only intended as a guide and should not be used in preparing specifications.
Properties Cured
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | red | - |
| Hardness Shore A | - | 25 | DIN ISO 48-4 |
| Tensile strength[1] | - | 2.5 N/mm² | ISO 37 |
| Elongation at break[2] | - | 300 % | ISO 37 |
1 Type 3 / 23°C / 2mm
2 Type 3 / 23°C / 2mm
These figures are only intended as a guide and should not be used in preparing specifications.
2 Type 3 / 23°C / 2mm
These figures are only intended as a guide and should not be used in preparing specifications.
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® E10"
| Colour: | Red |
|---|---|
| Crosslinker type: | E – Acidic (acetic acid) |
| Max. temp. °C: | 250°C |
| Properties: | Heat-resistant |
| Shore A: | 25 |
| Silicone product groups: | Adhesives / sealants |
| Viscosity [mPa·s] D=0.5–1 1/s: | 1'000 - 10'000 |
Zubhör
Airflow 1 Combi
CHF 180.85*
PC Cox Airflow 1 Combi 310ml Kartusche Beutel Druckluftpistole:
Airflow 1 Combi 310ml Kartusche Beutel
- 310ml cartridges
- 310ml bag
- flexible working
FB25 Hand flame set
CHF 367.25*
Das PYROSIL® Flammenbeschichtungsgerät:
P/N 89012 FB25 - Hand flaming set
- Flame coating device
- Effective and cost-effective
- Can be used for almost all materials
- Gentle on materials in terms of temperature
Isopropyl alcohol 99 %
CHF 11.90*
Isopropylalkohol 99%:
Isopropylalkohol 99% / 1 Liter
- purity 99 %
- readily soluble in water
Primer G718
CHF 74.05*
- improves the adhesion of
- RTV-1 silicone rubber
- Application for metals or plastics.