ELASTOSIL® RT-K
CHF 272.75*
Available immediately
Pick your accessory
CHF 22.65*
Product number:
60003747
Product information "ELASTOSIL® RT-K"
Properties Uncured
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | light gray | - |
| Density | 20 °C | approx. 1.22 g/cm³ | DIN 53217 |
| Viscosity, dynamic | 23 °C | 15000 mPa·s | Brookfield |
Catalyzed
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Viscosity, dynamic nach aufrühren | 23 °C | 9000 mPa·s | ISO 3219 |
| Pot Life 2% T 47 | 23 °C | 30 min | DIN EN ISO 2555 |
| Pot Life 4 % T 40 | 23 °C | 90 min | DIN EN ISO 2555 |
| Curing time 2% T47 | 23 °C | 3 h | - |
| Curing time 4% T40 | 23 °C | 9 h | - |
Properties Cured
catalyzed with 4 wt % Catalyst T40, after 4 days at 23°C / 50 % rel. humidity
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | light gray | - |
| Density in water | 23 °C | 1.22 g/cm³ | ISO 2781 |
| Tear strength | - | > 3 N/mm | ASTM 624 B |
| Hardness Shore A | - | 45 | ISO 868 |
| Tensile strength | - | 2 N/mm² | ISO 37 |
| Elongation at break | - | 130 % | ISO 37 |
| Linear shrinkage 2% T47 | 23 °C | 0.3 % | - |
| Linear shrinkage 4% T40 | 23 °C | 0.7 % | - |
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® RT-K"
| Colour: | Light grey |
|---|---|
| Max. temp. °C: | 180°C |
| Shore A: | 45 |
| Silicone product groups: | Potting compounds |
| Silicone system: | RTV-2 condensation-curing |
| Thermal conductivity: | 0,25 [W/mK] |
| Viscosity [mPa·s] D=0.5–1 1/s: | 1'000 - 10'000 |
| Volume resistivity: | 10¹⁴ Ohmcm |