ELASTOSIL® RT 628 A/B
Product number:
W60003784
Product information "ELASTOSIL® RT 628 A/B"
Properties Uncured
1 Brookfield measurement (component A: spindle 5 / 2.5 rpm; component B: spindle 1 / 2.5 rpm)
These figures are only intended as a guide and should not be used in preparing specifications.
|
Property
|
Condition
|
A
|
B
|
Method
|
|---|---|---|---|---|
| Color | - | Black | White | - |
| Density | 23 °C | 1.33 g/cm³ | 1.00 g/cm³ | DIN EN ISO 2811-2 |
| Viscosity, dynamic[1] | 23 °C | 80000 mPa·s | 650 mPa·s | DIN EN ISO 2555 |
| Component containing the platinum catalyst | - | - | B | - |
These figures are only intended as a guide and should not be used in preparing specifications.
Catalyzed
All values given for a mixing ratio of A:B = 9:1 by weight.
1 Brookfield measurement (spindle 6 / 2.5 rpm)
2 Time to exceed 150,000 mPas, Brookfield measurement (spindle 6 / 2.5 rpm)
These figures are only intended as a guide and should not be used in preparing specifications.
All values given for a mixing ratio of A:B = 9:1 by weight.
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Viscosity, dynamic of mix[1] | 23 °C | 40000 mPa·s | DIN EN ISO 2555 |
| Pot Life[2] | 23 °C | 60 min | DIN EN ISO 2555 |
| Curing time | 23 °C | 24 h | - |
2 Time to exceed 150,000 mPas, Brookfield measurement (spindle 6 / 2.5 rpm)
These figures are only intended as a guide and should not be used in preparing specifications.
Properties Cured
Mixing ratio A:B = 9:1 (by weight); curing conditions: 15 min. at 165 °C in a circulating air oven, 2 mm sheet, not pressed, no postcuring.
These figures are only intended as a guide and should not be used in preparing specifications.
Mixing ratio A:B = 9:1 (by weight); curing conditions: 15 min. at 165 °C in a circulating air oven, 2 mm sheet, not pressed, no postcuring.
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | Dark gray | - |
| Density (in water) | 23 °C | 1.23 g/cm³ | DIN EN ISO 1183-1 A |
| Tear strength | - | 12.5 N/mm | ASTM D 624 B |
| Hardness Shore A | - | 54 | DIN ISO 48-4 |
| Tensile strength | - | 3.2 N/mm² | ISO 37 type 1 |
| Elongation at break | - | 220 % | ISO 37 type 1 |
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® RT 628 A/B"
| Colour: | Grey |
|---|---|
| Max. temp. °C: | 180°C |
| Shore A: | 50 |
| Silicone product groups: | Potting compounds |
| Silicone system: | RTV-2 addition-curing |
| Thermal conductivity: | 0,25 [W/mK] |
| Viscosity [mPa·s] D=0.5–1 1/s: | 40'000 - 50'000 |