ELASTOSIL® RT 625 A/B
Product number:
60080700
Product information "ELASTOSIL® RT 625 A/B"
Properties Uncured
|
Property
|
Condition
|
A
|
B
|
Method
|
|---|---|---|---|---|
| Color | - | translucent | colourless | - |
| Density | 23 °C | 1.10 g/cm³ | 0.98 g/cm³ | DIN EN ISO 2811-1 |
| Viscosity, dynamic after stirring | 23 °C | 25000 mPa·s | 900 mPa·s |
Catalyzed
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Viscosity, dynamic | 23 °C | 12000 mPa·s | ISO 3219 |
| Mix ratio[1] | - | 9 : 1 | A : B |
| Pot life[2] | - | 60 min | - |
| Curing time non-adhesive | - | 12 h | - |
2 at 23°C. up to 100000 mPas
These figures are only intended as a guide and should not be used in preparing specifications.
Properties Cured
Compression moulded 10 min at 100 °C
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | translucent | - |
| Density in water | 23 °C | 1.1 g/cm³ | DIN EN ISO 1183-1 A |
| Tear strength | - | 30 N/mm | ASTM D 624 B |
| Hardness Shore A | - | 25 | DIN ISO 48-4 |
| Tensile strength | - | 6.5 N/mm² | ISO 37 type 1 |
| Elongation at break | - | 600 % | ISO 37 type 1 |
| Linear shrinkage | - | < 0.1 % | - |
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® RT 625 A/B"
| Colour: | Translucent |
|---|---|
| Max. temp. °C: | 180°C |
| Properties: | High mechanical strength |
| Shore A: | 25 |
| Silicone product groups: | Potting compounds |
| Silicone system: | RTV-2 addition-curing |
| Viscosity [mPa·s] D=0.5–1 1/s: | 10'000 - 20'000 |