ELASTOSIL® M 4670 A/B
Product number:
60080757
Product information "ELASTOSIL® M 4670 A/B"
Properties Uncured
These figures are only intended as a guide and should not be used in preparing specifications.
|
Property
|
Condition
|
A
|
B
|
Method
|
|---|---|---|---|---|
| Color | - | beige | colorless | - |
| Density | 23 °C | 1.32 g/cm³ | 1.03 g/cm³ | DIN EN ISO 2811-1 |
| Viscosity, dynamic after stirring | 23 °C | 120000 mPa·s | 7000 mPa·s | ISO 3219 |
Catalyzed
1 (pbw)
These figures are only intended as a guide and should not be used in preparing specifications.
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Viscosity, dynamic | 23 °C | 80000 mPa·s | ISO 3219 |
| Mix ratio[1] | - | 10 : 1 | A : B |
| Pot Life (up to 150000 mPas) | 23 °C | 90 min | DIN EN ISO 2555 |
| Curing time tack free | - | 12 h | - |
These figures are only intended as a guide and should not be used in preparing specifications.
Properties Cured
Cure conditions: 5 min / 165 °C in press
These figures are only intended as a guide and should not be used in preparing specifications.
Cure conditions: 5 min / 165 °C in press
| Property |
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | beige | - |
| Density in water | 23 °C | 1.28 g/cm³ | DIN EN ISO 1183-1 A |
| Tear strength | - | 15 N/mm | ASTM D 624 B |
| Hardness Shore A | - | 55 | DIN ISO 48-4 |
| Tensile strength | - | 5.5 N/mm² | ISO 37 type 1 |
| Elongation at break | - | 280 % | ISO 37 type 1 |
| Linear shrinkage | - | < 0.1 % | - |
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® M 4670 A/B"
| Colour: | Beige |
|---|---|
| Max. temp. °C: | 180°C |
| Properties: | High mechanical strength |
| Shore A: | 55 |
| Silicone system: | RTV-2 addition-curing |
| Thermal conductivity: | 0,25 [W/mK] |
| Viscosity [mPa·s] D=0.5–1 1/s: | 70'000 - 80'000 |