ELASTOSIL® M 4440
Product information "ELASTOSIL® M 4440"
Properties Uncured
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Color | - | white | - |
| Density | 23 °C | 1,25 g/cm³ | DIN EN ISO 3219 |
| Viscosity, dynamic after stirring | 23 °C | 25000 mPa·s | ISO 3219 |
Catalyzed
(catalyzed with 3 wt % Catalyst T 37)
These figures are only intended as a guide and should not be used in preparing specifications.
(catalyzed with 3 wt % Catalyst T 37)
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Viscosity, dynamic | 23 °C | 2000mPa·s | ISO 3219 |
Properties Cured
Cured, with 3 wt % Catalyst T 37 ,after 4 days at 23 °C / 50 % rel. humidity.
|
Property
|
Condition
|
Value
|
Method
|
|---|---|---|---|
| Density in water | 23 °C | 1,23 g/cm³ | ISO 2781 |
| Tear strength | - | 4,5 N/mm | ASTM D 624 B |
| Hardness Shore A | - | 37 | ISO 868 |
| Tensile strength | - | 2,5 N/mm² | ISO 37 |
| Elongation at break | - | 220 % | ISO 37 |
| Linear shrinkage | - | 0.4 % | - |
These figures are only intended as a guide and should not be used in preparing specifications.
Disclaimer
All the information provided is in accordance with the present state of our knowledge. Nonetheless, we disclaim any warranty or liability whatsoever and reserve the right, at any time, to effect technical alterations. The information provided, as well as the product's fitness for an intended application, should be checked by the buyer in preliminary trials. Contractual terms and conditions always take precedence. This disclaimer of warranty and liability also applies particularly in foreign countries with respect to third parties' rights.
Properties "ELASTOSIL® M 4440"
| Colour: | White |
|---|---|
| Properties: | Resistant to casting resins |
| Shore A: | 37 |
| Silicone product groups: | Mould-making compounds |
| Silicone system: | RTV-2 condensation-curing |
| Viscosity [mPa·s] D=0.5–1 1/s: | 20'000 - 30'000 |